The SP12 Stainless is a set of 6 asphalt anchors rated at 2,000 lbs. pull. The 12" long anchor is designed to mount bike racks, plates, fences, machinery directly to asphalt surfaces. The anchor performs well in 2.5" shallow asphalt which is common in parking lots and walkways in the US. The use of Stainless Steel anchors is recommended for applications near potable water, or high salt environment.

Each anchor incorporates a 3/8"-16 UNC (course) thread.   The anchor requires a 7/8" dia hole, 12" deep, and the use of a grout such as our EPX2 or EPX3. A 1.4" welded washer at the top of the anchor prevents the anchor from dropping below the surface as well as preventing the anchor from being pulled up into the mounting plate when the bolt is tightened.

The anchors are mounted flush with the surface of the roadway, so that attached devices can be removed without leaving dangerous screws or protrusions on the walkway. The anchors are pre-installed with a bolt and a washer.

This is a set of 6 anchors, each pre-installed with a stainless steel 1" long bolt and a stainless steel 1" diameter washer.